Optocoupler Tester 6th USB-C 4-Pin Photo Coupler Detection with Flashlight, Online Test Module Board Repair, Green PCB Device(6th)

Product description Features:1. Test to confirm that the board under test is turned off and the electrolytic capacitors on the motherboard are fully discharged. It is strictly forbidden to test when the motherboard is powered on.2. Confirm the optocoupler PIN1 (the pin with a small dot on the test board also has a corresponding mark 1 pin)3. Connect the optocoupler test board to the USB power cord, and test the optocoupler with the test board probe point. If the light in the optocoupler test board keeps flashing, it means that the optocoupler is good (the light brightness may be different from the optocoupler). As long as it flashes, it means that the optocoupler is good)4. Measure to for ensure that the optocoupler test board has good with the tested optocoupler5. If the indicator light is always on or off, remove the optocoupler from the circuit board and insert it into the optocoupler seat of the breadboard to reconfirm the test results6. Applicable to 4-pin optocouplers, other types of optocouplers are temporarily not applicableSpecifications:Part name:Optocoupler TesterColor: greenMaterial: PCB + electronic componentsSize: as shown in the figureDifferentiation: 3rd generation, 4th generation, 5th generation, 6th generationDifference:1: The interface of the 3rd generation is USB interface, no indicator light when connected to power, indicator light when testing, need to be plugged in to use2: 4th generation is type-c interface, there is an indicator light when plugged in, need to be plugged in to use:3: 5th generation is type-c interface, there is an indicator light when plugged in, upgraded on the basis of 4th generation, four-pin plug-in optocoupler test and patch test, need to be plugged in to use4: 6th generation is type-c interface, there is an indicator light when plugged in, four-pin plug-in optocoupler test and patch test, with flashlight lighting, with battery for chargingPackage Contents:1 x Optocoupler TesterOnly the above package contents, not including other products. Manufacturer Contact Information no

• [COMPREHENSIVE TESTING ] This Optocoupler Tester is designed to accurate testing of 4-pin optocouplers, providing reliable every . It allows you to confirm that the board is powered off and that electrolytic capacitors are fully discharged before testing, enhancing safety during use.
• [USER-FRIENDLY ] Featuring a pin marking system, this simplifies the testing process. Just connect the tester to the USB source and use the probe contact point to the optocoupler's functionality, indicated by a flashing light.
• [ GENERATIONS] Available in multiple generations, each with upgraded features like USB and interfaces, this tester adapts to your needs. The 6th generation even includes a flashlight added convenience during low-light conditions.
• [RELIABLE INDICATOR LIGHT] The tester's indicator light helps quickly identify the operational status of the optocoupler. If the light remains or off continuously, simply remove and retest it in a breadboard seat further confirmation.
• [SIZING REMINDER] Please you are using 4-pin optocouplers as this is specifically designed them. your specifications before making a purchase.