Small Billet Aluminum Boost Leak Testers (2" (51mm) Boost Leak Tester END Cap)

Get your boost back and get Full Performance From Your Turbo! This boost leak tester is designed to fit over the inlet flange of your turbo charger and allows you to pressurize the charge system with compressed air while the vehicle is off. This is an important tool every turbo car owner needs in their arsenal of tools. It will keep the turbo healthy by eliminating leaks in the boost path and not allowing it to over speed compensating for a boost leak. A must if you are tuned or any time you are replacing any components in the intake tract such as charge hoses, intercooler, manifold, vac lines, injectors…etc. Also a must if you are going to the track and want the peace of mind that the turbo wont over-work or risk blowing any hoses off that are loose Why have the Gauge? Not having a gauge readout on a boost leak test is similar to filling air in your car's tire without a gauge. You just don't know how much air is in the system! It’s wise to know how much pressure is actually going into the charge system to prevent damage to the engine and to yourself. For example, if the compressor is unregulated (ex. shop air at 90 PSI) there is a risk that you can over-pressurized and something will give. Benefits of Gauge: 1. Allows you to apply a safe amount of pressure to prevent injury or damage 2. read how fast the system holds and bleeds air 3. Gives a good comparison of compressor outlet air Vs. boost test air while pressurizing. (lower the difference the better) Design Features: 2" Aluminum End Cap - Drilled and tapped, 1/8" NPT threaded gauge port & fitting port Silicon Coupler - High quality 4 layer Boost Gauge - Custom Stainless Steel 30 PSI / 2 Bar 30 PSI range will give you the appropriate reading when testing your charge pipes for low, medium or high boost levels.

• PULL HARDER , IMPROVE MPG & KEEP YOUR MOTOR HEALTHY --BY ELIMINATING BOOST LEAKS! This boost leak tester is designed to fit over the inlet flange of your turbo charger and allows you to pressurize the charge system with shop compressed air while the vehicle is off; This allow you to listen for leaks that become easily identifiable
• It is absolutely necessary to have a tester mounted gauge so you know exactly how much air is in the motor and avoid over-pressurizing; Would you fill up your car's tire without knowing how much pressure is going in? Rest assured this shock proof precise gauge will tell you exactly how much boost pressure you are using
• Eliminating leaks in your turbo motor will restore HP, improve fuel economy and avoid costly turbo or engine repair! A boost leak test is a very quick and easy test